2010 Technical Symposium | University of Calgary

Water Permeability in Heavy Oil Reservoirs Near and Below An Initial Water Saturation
November 1, 2010
Kinetic Modeling of the In-Situ Combustion Process for Athabasca Oil Sands
August 1, 2010
Using Two-Step Fuzzy Ranking and Artificial Neural Network for Reservoir Characterization
June 15, 2010
Water Permeability in Heavy Oil Reservoirs near Initial Water Saturation and Numerical Simulation
June 14, 2010
Two Issues in Wellbore Heat Flow Modeling Along With the Prediction of Casing Temperature in Steam Injection Wells
June 14, 2010
Scale-Up Study of Chemical Flooding For Heavy Oil Reservoirs
June 14, 2010
Proxy Models as a Substitute for Full Reservoir Simulations (to be applied for SAGD process)
June 14, 2010
Modelling and Simulation of Cold Heavy Oil Production with Sand
June 14, 2010
Miscible Displacement Process: First Contact Miscibility Process
June 14, 2010
Improved Experimental and Mathematical Techniques for Measurements of Gas Diffusivity in Heavy Oils_Effect of Interface Resistivity
June 14, 2010
GPU Parallel Computing
June 14, 2010
Field-Scale Diffusion and Dispersion Coefficient Determination
June 14, 2010
Design of Injection Well String For Dissolution Acceleration in CO2 Storage
June 14, 2010
Current Status of my Research& Wellbore Heat Flow Modeling
June 14, 2010
Compositional Reservoir Simulation with Advanced EOS
June 14, 2010
Assisted History Matching for Oil Recovery
June 14, 2010
Advanced Linear Solvers
June 14, 2010
A Multi-Segment Multiphase Wellbore Model Associated with Dynamic Gridding
June 14, 2010
Spatial Entropy Based Mutual Information in Hyperspectral Band Selection for Supervised Classification
January 1, 2010
Research progress of Modeling on Cold Heavy Oil production with Sand
January 1, 2010
Permeability Upscaling in Naturally Fractured Reservoirs
January 1, 2010
Overview of environmental protection methods in heavy oil cold production
January 1, 2010
Numerical Well testing using Unstructured PEBI Grid
January 1, 2010
Numerical Simulation of SAGD Recovery process in presence of Shale Barriers, Thief Zones and Fracture System
January 1, 2010
Numerical Simulation and Optimization of the SAGD process in Surmont Oil Sands Lease
January 1, 2010
New Methodology for Modeling of Compositional Grading within the Gas-Oil Transition Zone in Petroleum Reservoirs
January 1, 2010
Modeling of Sand Production in CHOPS Based upon Tensile Sand Failure and Issues with Wormhole Modeling
January 1, 2010
Modeling of 3D Compositional Grading and Plus Fraction Molecular Weight Change in Non-isothermal Petroleum Reservoirs
January 1, 2010
Modeling and Simulation of Underground Coal Gasification (UCG) Process
January 1, 2010
Mass Diffusion Parameters in Presence of Interface Resistance in Gas-Bitumen Systems
January 1, 2010
Lessons learned and experiences gained in developing Waterflooding concept of Granite Basement Fractured Reservoir: 20 historical years case study
January 1, 2010
Investigation of Isotherm Polymer Adsorption in Porous Media
January 1, 2010
Geostatistical Modeling and Numerical Simulation of the SAGD process: case study of an Athabasca Reservoir with Top Water and Gas Thief Zones
January 1, 2010
Experimental study to find optimum pressure for separation of wellhead fluids
January 1, 2010
Design and Numerical Study of a New Hybrid CSS-SAGD Process Using Horizontal Wells for Recovering Heavy Oil
January 1, 2010
Development of an Algorithm of Dynamic Gridding for Multiphase Flow Calculation in Wells
January 1, 2010
Development and Optimization of a Polymer Conformance Control technology in Mature Reservoirs: Laboratory experiments vs. Field scale Simulation
January 1, 2010
Comparative study of Compositional Grading Models in Petroleum Reservoirs
January 1, 2010
Application of Fiber Bragg Grating Sensor Networks in Oil Wells
January 1, 2010
A successful story of integrating Geological Characterization, Reservoir Simulation, Assisted History Matching and EOR in a Giant Fractured Granite Basement: a road map to maximize recovery in Unconventional Reservoirs
January 1, 2010
A Semi-Unsteady-State Wellbore Steam/ Water Flow Model for Prediction of Sandface Conditions in Steam Injection Wells
January 1, 2010
A Novel Injection Well String Design to Accelerate CO2 Dissolution in Deep Saline Aquifers
January 1, 2010
A Multi-Segment Multiphase Wellbore Model Associated with Dynamic Gridding
January 1, 2010
A Constant-Pressure Gas Diffusivity and Solubility Measurements in Heavy Oil and Bitumen Systems using Pressure Decay Technique’s concept
January 1, 2010

© Copyright University of Calgary - Reservoir Simulation. All Rights Reserved.